PRISM Real-Time OMS
PRISM Real-time OMS can handle your most severe storm situations without drowning in a flood of real-time SCADA updates. That's because it's built from the ground up as a real-time system, using the same data model as our SCADA and distribution management systems. This makes PRISM OMS unique among comprehensive outage solutions. The PRISM Real-time Outage Management System (OMS) doesn't just minimize network outages; it dramatically improves the network by accessing and updating the same data as SCADA, real-time automation and real-time analysis. These applications are presented as part of a unified operator interface, reducing reaction time, simplifying training, and optimizing data flow. The ACS PRISM Real-time OMS is the industry’s first truly integrated OMS for the Smart Grid.
PRISM Real-time OMS can help you:
- Minimize the cost of database maintenance
PRISM Real-time OMS solves the traditional database maintenance and synchronization problems inherent with traditional OMS systems by using the same model and the same data as SCADA and integrated DMS applications. The electrical network database and model is maintained using the utility’s existing GIS as the source database editor.
- Maximize Accuracy
Since PRISM employs a single network model, and therefore shares the same topology among OMS and all other DMS applications, PRISM Real-Time OMS is updated immediately when changes occur. The topology is always up-to-date. This means accurate fault predictions and crew dispatch.
- Maximize Performance
Most outage management systems are based on GIS platforms whose graphics and relational database were not designed for real-time performance. As a result, these systems often suffer serious performance problems during emergencies and other periods of high activity. PRISM OMS is built to meet the performance demands of a SCADA/EMS/DMS -- both in its graphics and real-time data processing capability.
- Reduce Customer Call Volume and Outage Duration
PRISM Real-Time OMS includes optional feeder automation applications that automatically restore service to restorable sections of the feeder within seconds. This not only minimizes calls, but benefits non-automated areas of the distribution network, since crews can be dispatched to where they are truly needed. Since the topology changes that result from automatic reconfiguration are known immediately by the OMS, operators know almost instantaneously that power has been restored.
- Improve Situational Awareness
The distribution and outage management systems share a common operator interface. The same data model supports schematic and geographic network views. The integration of data and graphics, along with enhanced features, enhances call center and dispatcher operations.
Call Taking / Call Management
The PRISM OMS Customer tab organizes the information with a customer focus. The customer information is organized and displayed both graphically and in tabular form by area in order to focus on critical accounts.
OMS provides the following features:
- OMS identifies to the call taker the special condition
- The Call taker is able to elevate the caller’s special handling
- Call Back / Text messaging is used to update the problem to the critical customer
- The system alarms the critical situation in the alarm and event zone for acknowledgment
- The Ticket is prioritized to reflect condition
- The display icon is specially selected to identify the type and location of the account.
In addition to the above, the involvement of agencies such as the Police or Fire Department is handled by OMS in a special manner. The system will dynamically query the call taker based on the call code, and answers to previous questions. For example the system will ask if the FDPD is on standby. The queries will research if a public hazard is present if the caller reports a line is down. The responses are displayed by ticket and icon shape with text on the map.
The OMS system administrator is able to identify the various critical customer groups such as:
•Police / Fire
•Hospitals / Schools
•High Rise Building / Manufacturing
•Military / Government
•Co-Gen / Sewage or Pump Station
•Airport / Civil Defense
Figure: Customer / Call Summary Tab
Figure: Call Detail Screen
PRISM OMS provides special handling of calls related to a critical facility or account. Critical facilities are user defined and typically include private medical account, major account, critical infrastructure, hospital facility, distributed generation or resources, etc. Calls from these classifications are alarmed using a visual and/or audible alarm that is issued to alert the control center personnel. An alarm notification will be sent to the OMS alarm zone within the graphical interface for any critical facility or major account.
If a call is related to an outage of a critical nature a PD/FD flag is shown on the call summary screen is indicate if the police or fire department are involved.
PRISM OMS provides a Ticket Management system that summarizes all of the ticket information and is primarily used by the Operator / Dispatcher. Ticket Management is designed to assist the Operator Dispatcher to analyze the location of any ticket (prediction or confirmed outage) and to monitor the repair progress. The Ticket Summary display provides an itemized summary of all Tickets on the system in whole or by area.
Following calls or outage reports that are not telemetry-driven, a prediction of a device failure or outage location is made. The system automatically generates an Incident Ticket. Trouble Ticket Management manages outages as either Incident (predicted) Tickets or as Outage (confirmed) Tickets. A Ticket is automatically assigned to an area. A user friendly “tree” panel organizes the calls into the following basic ticket groups which are filtered by type based on the user’s area of responsibility:
- Incident Tickets
- Outage Tickets
- Completed Tickets
Within each of these call groups the Tickets are organized into accounts as follows which may be expanded by political, electrical or work areas:
A roll-up numeric of the total number of Tickets for each level (# total) is displayed with each group. When a Ticket is generated the system updates the Trouble Ticket Summary display identifying the predicted outage devices and other relevant data for comparison and monitoring purposes. The Trouble Ticket Summary display shows a summary utilizing a single line per ticket.
Since PRISM OMS incorporates SCADA telemetry, the system will behave differently on automated circuits than on non-automated circuits. The system will not generate a predicted incident against a device which the telemetry shows to be closed. The prediction algorithm will look further upstream to the next non-telemetered device. Any device which operates under SCADA control as a commanded change of state, the system will generate an outage ticket which does not have to be confirmed by a crew. If the automated switch operated automatically based on a fault condition (un-commanded), then the system will predict an incident downstream of the open switch.
Conversely if an open switch closes automatically, or under SCADA control, the system will close the outage ticket and commence with the call back process to inform the affected customers. The SCADA generated tickets are logged as SCADA generated so as to differentiate them from tickets generated manually or by the prediction algorithm.
Figure: Trouble Ticket Summary Display
Figure: Ticket Detail Display
Outage Prediction Analysis
PRISM OMS uses entered customer call data as well as external event information from available system data sources including SCADA, AMI, IVR, etc. to perform an outage analysis. The algorithm uses the real-time network topology-tracing algorithm with rules that provide automatic faulted device prediction in order to minimize the prediction accuracy resulting in the timely restoration of all customer outages. The system supports a number of user configured tuning parameters and features that adjust the behavior of the prediction analysis in order to meet the different operational preferences of each utility.
Crew Management provides an organized and efficient way to manage the correlation of crews to Work Orders or Tickets. The Crew Management user interface is designed to enhance the dispatcher or supervisor’s situational awareness of the progress of outage restoration or work resolution. As such, the Crew Management tab enables the Operator / Dispatcher to create crews, monitor crews and assign crews to jobs. The dispatcher is able to monitor the crew workload and the crew’s progress. If improved crew workload balancing can be accomplished or if changes in the personnel or resources are required in order to accomplish timely restoration, the dispatcher can monitor and make these changes from the Crew tab.
Work Order Management
PRISM OMS provides the capability to manage crews and activity related to daily work orders. Outages represent the emergency work. Work Orders are specifically non outage related jobs. Since the majority of the utility work is not related to outages or emergencies but for capital or maintenance work, the Work Order Management subsystem in OMS is used to schedule the work for independent creation, tracking and management of each job. The Work Orders are often defined outside of OMS (in an IT Work Management System) or those jobs that are manually entered into OMS.
Work orders may be linked to Tickets if the work order is related to the outage. In this case even if the outage is closed following complete restoration of service, the work order may remain open until all repairs are completed.
Similar Summary screens and Detail screens are used to monitor and to manage Work Orders as those that are used to manage Tickets.
The system offers both real-time dashboard summaries of the system as well as detailed tabular and graphic reports supporting drill-down and query capability. A set of standard reports are provided which cover Crew, Ticket, Outage, Call, outage codes, call codes, failure codes, calculations, area reports, device operation, etc. The user is able to create custom reports using drag and drop from the data model.
PRISM OMS automatically calculates the IEEE 1366 performance indices such as SAIDI, CAIDI, SAIFI based on the logged events, times and degree of restoration for display and reporting.
Effectively monitoring and managing the distribution system using today’s advanced DMS applications involves a sophisticated electrical model that is more complex than those needed for static, balanced transmission systems. Real-time power flow and load estimation for an unbalanced, three-phase network must incorporate telemetered data from a variety of sources on the system, along with information from GIS and planning models.DASmap >
Interactive Voice Response
For utilities who do not have an automated IVR System, ACS offers both Emergency Crew Call-out and Customer Call-handling technology. PRISM utilizes automated telephony technologies, which streamline the performance of operations centers. Both touchtone and speech-enabled applications can automate routine tasks, provide access to customer information, outages etc. and route calls intelligently.Learn More >
Storm Damage Assessment
Storm Damage Assessment is used for those situations where major network damage is present. The information is collected and reported to the operators from field crews.Learn More >
PRISMReal-time OMS includes a Topology Processor which calculates the network topology in real-time representing an accurate three phase model of the network state. The ability to calculate the actual real-time topology in spite of a sustained flood of recloser and device changes, such as would be expected during severe storms, is an important capability for secure and safe operations.Learn More >
Real-time Redline is an application that enables the dispatcher/operator to maintain changes to the network connectivity directly through the dispatcher/operators user interface. Not all changes to the network connectivity are a result of planned changes, such as those resulting from storm damage.Learn More >
Switching Plan Generation
TPRISMReal-time OMS supports a powerful SwitchPlan application which is used to create switch orders and to manage their execution and archiving. Switch plans may be created using supported advanced functions such as Intelligent Switching and Optimal Switching. The plans may be generated manually by the Operator / Dispatcher. SwitchPlan offers visualization with the geographic map diagram.Learn More >
Graphical User Interface
PRISM Real-time OMS offers unique graphical features that enable the dispatcher to monitor the restoration process, confirm the customer location, analyze the network impact and make any changes to its operation.Learn More >
PRISM OMS Workforce Resource (POWR) is a product designed to provide the user personalized tabular OMS outage, non-outage work information and network switch plan assignments to work crews.Learn More >
GridVu is a geographical product which is designed to provide general DMS and OMS incident summary and location information via the internet to utility personnel and to the public. The information is presented as icons, which are overlaid on a Google map to show their geographic location relative to the geographically viewed network.Learn More >
PRISM Real-time OMS Brochure PDF